Accessories

2 40lbs motors THIS ITEM IS ONLY AVAILABLE AS AN UPGRADE. MUST BE ORDERED WITH THE GAME CHANGER SET.

We have all been there, trying to sneak up on a fish, you are almost there and you bump the front trolling motor just to get a little closer and the fish spooks then takes off!  Not anymore! Let me Introduce you to the new "Nudge"! Once again take your boat control to the next level! The Nudge system allows you to Nudge your boat forward with an additional stomp switch.  WHEN YOU BUY THE POWER BRAKES SYSTEM YOU GET 50% OFF THIS ITEM.  Add both products to cart and discount automatically is applied With the Nudge system you will get  30' 18ga wire Nudge relay 2 Foot Switches 100amp Breaker  

For those that need to calm down the stopping power we have a speed selector.  Choose between High and Medium. There are no circuit boards to go out! Just a switch. BUNDLE AND SAVE $50 WHEN YOU BUY THE POWER BRAKES SYSTEM. Discounts given at checkout   Kit comes with, Waterproofing kit 20 feet 10/3 wire Perko style switch Instructions

These mounts will fit most manual jack plates, so you can mount your Power-Brakes. Comes with stainless hardware.  THE ONLY BOLTS THIS DOES NOT COME WITH IS THE BOLTS TO CONNECT TO THE JACK PLATE. We have no idea how long those bolts would need to be for you plate. 

  If you do not have a jack plate no problem! We have a mount for that. This mount fits between the big motor and your transom. Not very hard to install, even a Bass fisherman can do it!  Comes with stainless hardware.  You may or may not need longer bolts that goes through the transom? Just remember you are adding 3/8'' plate between the motor and the transom.

    These fit most boats, with that being said we have found a few that these will not work on. Please call or text us if you are not sure these will work with your boat. Designed for our Shallow Water Anchor Mounting Plate for those need additional clearance. This will mount between your Anchor and its mount, rise up 6'' then out just enough to clear your anchor when deployed. You my need longer 3/8 bolts that holds the anchor to the mount. You will be adding a 1/2'' plate between the anchor and the anchor mount.

Handles extend the latch 7", making it even safer to deploy Power Brakes.   Comes with 2 powder coated rods, heat shrink and zip ties.  EASY to install!

Lean your Rod(s) against this rod holder attached to your front chartplotter.  Installs in minutes.    Machined from heavy duty aluminum and powder coated.   

Lean your Rod(s) against this rod holder attached to your front chartplotter.  Installs in minutes.   Machined from heavy duty aluminum and powder coated.  Available in Single or Pair.

Foot pedal switch to turn your Power Brakes - The Game Changer™ trolling motors ON/OFF.   EASY TO USE. Hands-free convenience with the tap of your foot. Comes with 2 butt splices. Contact Rating: 10A 250VAC;3 Terminals: Common, Normally Open, Normally Closed (SPDT: Single-Pole-Double-Throw). We use the Red and White wires.

    This mount plate slides between the talon and your talon mount. Allows you to mount the Power-Brake right next to the talon. Powder coated Aluminum  Set comes with 2 plates and bolts for the brakes.

These mounts will fit most manual jack plates, so you can mount your Power-Brakes. Will not work on the Atlas jack plates. But we do have a mount for the Atlas. Comes with stainless hardware.  THE ONLY BOLTS THIS DOES NOT COME WITH IS THE BOLTS TO CONNECT TO THE JACK PLATE. We have no idea how long those bolts would need to be for you plate.  After you place an order please send a pic of your jack plate and the back of your boat if you can, just so I can try and see if you need any additional hardware. Send the pics to 9186362342 with your order number.

These mounts will fit most manual jack plates, so you can mount your Power-Brakes. Will not work on the Atlas jack plates. But we do have a mount for the Atlas. Comes with stainless hardware.  You may or may not need longer bolts that goes through the transom? Just remember you are adding 3/8'' plate between the motor and the transom. After you place an order please send a pic of your jack plate and the back of your boat if you can, just so I can try and see if you need any additional hardware. Send the pics to 9186362342 with your order number.

These mounts will fit most manual jack plates, so you can mount your Power-Brakes. Will not work on the Atlas jack plates. But we do have a mount for the Atlas. Comes with stainless hardware.  THE ONLY BOLTS THIS DOES NOT COME WITH IS THE BOLTS TO CONNECT TO THE JACK PLATE. We have no idea how long those bolts would need to be for you plate.  After you place an order please send a pic of your jack plate and the back of your boat if you can, just so I can try and see if you need any additional hardware. Send the pics to 9186362342 with your order number.

These mounts will fit Raptors, Power Poles and Talons, so you can mount your Power-Brakes. Comes with stainless hardware.  You my need longer 3/8 bolts that holds the anchor to the mount. You will be adding a 1/2'' plate between the anchor and the anchor mount. After you place an order please send a pic of your jack plate and the back of your boat if you can, just so I can try and see if you need any additional hardware. Send the pics to 9186362342 with your order number.

  This kit is a must have if you are just buying arms and have your own motors. This kit is what we use to build the system. It is bulletproof!  Waterproofing kit 20 feet of 10ga wire 30' 18ga wire Relay Foot Switch 100amp Breaker Terminal kit  

  This Waterproofing kit is a good idea to have as a spare in the event you need to put a new motor on you will have all you need to waterproof the shaft.